Cast Iron Collector Forums  
Google

Go Back   Cast Iron Collector Forums > General Discussion > Show & Tell

Notices

Show & Tell Share Your Cast Iron Cookware Finds and Restorations

Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2020, 11:56 PM
D_Madden D_Madden is offline
Senior Member
 
Join Date: Dec 2016
Location: Southern Indiana
Posts: 858
Default Anybody Want to Take a Guess on This One?

https://imgur.com/gallery/ljVwnfK

I'll start by saying that although it has an inset heat ring and 3 notches in the heat ring... it is NOT a lodge. Lots of oddities with this one.. size on top of the handle, bottom of the handle is similar to BSR, but it does flatten out at the sidewall... the three notches.. in the wrong places... I would have thought I'd have seen ones like it before... but this is a first.. and I have two of them... exactly the same.. bought at the same auction in southern illinois.
Reply With Quote
Sponsored Links
  #2  
Old 11-20-2020, 11:04 AM
SeanD SeanD is offline
Senior Member
 
Join Date: Jul 2016
Location: Central PA
Posts: 578
Default Re: Anybody Want to Take a Guess on This One?

I checked out the pics, but Im clueless........just a mystery I guess....
Reply With Quote
  #3  
Old 11-23-2020, 02:34 PM
MikeC MikeC is offline
Member
 
Join Date: Sep 2020
Posts: 26
Default Re: Anybody Want to Take a Guess on This One?

Wow this is an interesting one!
Reply With Quote
  #4  
Old 11-24-2020, 04:36 AM
JLenzo JLenzo is offline
Senior Member
 
Join Date: Jun 2018
Location: Ohio
Posts: 173
Default Re: Anybody Want to Take a Guess on This One?

Stumped
Reply With Quote
  #5  
Old 11-24-2020, 10:11 AM
MDFraley MDFraley is online now
Senior Member
 
Join Date: May 2015
Posts: 945
Default Re: Anybody Want to Take a Guess on This One?

Since this is a "GUESS" post suppose we all could theorize most anything. There were several skillets that had three notches placed at 120 degrees apart but they also had straight raised lines leading toward the center of the skillet and also an outer raised heat ring with breaks where the raised lines lead inward. Some collectors labeled this type skillet as the "Mercedes Skillet" simply because it takes the appearance of the Mercedes Benze auto-maker. Besides the proclaimed BSR skillet, Wagner/GHC made a similar skillet shown on P. 235 of the BB except the handle design was different to the regular skillets.
Again...just a "GUESS", but think a local foundry (or someone experimenting with cast iron design). used a Wagner skillet as a base skillet and incorporated the 120 degree break in the heat and are probably laughing at all of us trying to I.D. something that was never produced by a major company dealing in C.I. products.
I come across some of these oddities from time to time and if they are of good quality I will clean and season them and re-sale without any proclamations as to maker.
Reply With Quote
  #6  
Old 11-24-2020, 10:36 AM
Doug D. Doug D. is offline
Site Admin
 
Join Date: Mar 2012
Posts: 6,071
Default Re: Anybody Want to Take a Guess on This One?

To have started with a Wagner, they would have had to add the inset heat ring and build up the bottom of the handle to create the ridge, both probably more involved than the usual copycat would be willing to do. Using a BSR as a starting point would be my guess.
Reply With Quote
  #7  
Old Yesterday, 12:18 PM
D_Madden D_Madden is offline
Senior Member
 
Join Date: Dec 2016
Location: Southern Indiana
Posts: 858
Default Re: Anybody Want to Take a Guess on This One?

I have one of the little wagner 'mercedes' pans... that would be a lot of modification to get the look of the #8 that I posted.

https://imgur.com/gallery/FGXGICo

I'm stumped. At first I thought ok, someone just filed off the heat ring in three spots on a bsr to mark as theirs and its a one off... but I bought two at the same auction and they are marked the same... they were cast that way. (these came from southern illinois and I've seen pictures posted from someone else (also asking about identification) and they said they bought theirs in southern missouri...
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Advertisement

This site is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for sites to earn
advertising fees by advertising and linking to Amazon.com or its affiliates.
This page contains ads and links that earn commissions for CIC.

All times are GMT -5. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.