Cast Iron Collector Forums  
Google

Go Back   Cast Iron Collector Forums > General Discussion > Show & Tell

Notices

Show & Tell Share Your Cast Iron Cookware Finds and Restorations

Reply
 
Thread Tools Display Modes
  #1  
Old 10-21-2019, 02:02 PM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Lodge 1 Notch Question

At a Flea Market in Florida a Guy who sells only Cast Iron who I always talk to has a 1 Notch #10 pan that I believe is a Lodge.

He also has a cover that is also a #10 and seems to be a perfect fit.
Trying to figure out for sure if this is a Lodge and if the cover is correct.

Both have a raised #10, but would have to check to see if they are identical.

https://i.imgur.com/319T6d9.jpg
https://i.imgur.com/4rCHLln.jpg
https://i.imgur.com/SZFC0jU.jpg
https://i.imgur.com/AKyc1Hx.jpg
https://i.imgur.com/YZsbDP1.jpg

The #10 Griswold you can see part of has some pitting on the bottom but the inside is smooth, he wants $75 for it.
Reply With Quote
Sponsored Links
  #2  
Old 10-21-2019, 02:21 PM
Doug D. Doug D. is offline
Site Admin
 
Join Date: Mar 2012
Posts: 5,738
Default Re: Lodge 1 Notch Question

Lodge, I'd call that a match.
Reply With Quote
  #3  
Old 10-21-2019, 02:52 PM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Re: Lodge 1 Notch Question

Quote:
Originally Posted by Doug D. View Post
Lodge, I'd call that a match.
Thanks Doug

The #10 with a lid should be worth some money but with no name on it he might have to let it go cheap.

I kind of figured it was a Lodge but unsure about the cover.
The Guys English is a little hard to follow but always nice to talk to.
Reply With Quote
  #4  
Old 10-21-2019, 10:57 PM
D_Madden D_Madden is offline
Senior Member
 
Join Date: Dec 2016
Location: Southern Indiana
Posts: 736
Default Re: Lodge 1 Notch Question

anything old lodge especially with the raised sizes on top and even better being 10's... I'd buy in a heartbeat.
Reply With Quote
  #5  
Old 10-22-2019, 10:25 AM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Re: Lodge 1 Notch Question

Quote:
Originally Posted by D_Madden View Post
anything old lodge especially with the raised sizes on top and even better being 10's... I'd buy in a heartbeat.
I will be going to the smaller Flea Market tomorrow, I do not know/remember if he sets up tomorrow or not.

Being a #10 it has a lot going for it and with a lid that is a match helps.
I never did ask him what he wanted for it.
I checked Ebay and only #8's with 1 notch seem to come up, no #10.

So having no idea on what to offer I will I will ask.
Reply With Quote
  #6  
Old 10-22-2019, 11:21 AM
Doug D. Doug D. is offline
Site Admin
 
Join Date: Mar 2012
Posts: 5,738
Default Re: Lodge 1 Notch Question

Him asking $75 for a slightly sulfur pitted Griswold 10 doesn't bode all that well, sounds like he's not totally unaware of values. But I'd be more than happy paying $50 for the Lodge and lid (assuming no damage), or somewhere in that vicinity, more or less.
Reply With Quote
  #7  
Old 10-22-2019, 03:36 PM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Re: Lodge 1 Notch Question

I was figuring $50 also for the pan and lid but would like to get it cheaper.......
This is the last weekend we will be here so I will have to check it over a little better.
I forgot my steel rule to check how flat the pan is, but I do have a 6' wooden folding rule that might help a little.......very little.

The Griswold #10 looks nice but as you say the Sulfur Pitting brings it down.
Reply With Quote
  #8  
Old 10-28-2019, 04:06 PM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Re: Lodge 1 Notch Question

I was able to pick up the #10 for $30, very happy.
The pan is very flat as tested on the Glass Table Top where we are staying.
I can not find any flaws in the casting,just some marks in surface of the pan from use.

I will put it in the Lye tank when we get home.

https://i.imgur.com/Dnm5rZC.jpg
https://i.imgur.com/XnUv51c.jpg
https://i.imgur.com/J7dVRNK.jpg
https://i.imgur.com/cUOdopD.jpg
Reply With Quote
  #9  
Old 10-28-2019, 10:05 PM
D_Madden D_Madden is offline
Senior Member
 
Join Date: Dec 2016
Location: Southern Indiana
Posts: 736
Default Re: Lodge 1 Notch Question

I would have paid $30 for each piece... I really like the lodge with raised sizes... and 10's are a nice big pan... and that lid is very nice also.
https://imgur.com/gallery/ixbHn
Reply With Quote
  #10  
Old 10-29-2019, 10:36 AM
Ed Grabski Ed Grabski is offline
Member
 
Join Date: Mar 2018
Posts: 57
Default Re: Lodge 1 Notch Question

Yes I'm very happy with the pan.
This is my first Pan with a Lid, and I was looking for a lighter #10 for Home use.

I also have 2 BSR USA #10 in the trunk to take home which will go to my Nephew for his Breakfast Restaurant.

So I have one more trip to the Flea Market on Wednesday to see what I can find........as long as it will fit in the trunk

Your ARC Lodge looks very nice
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Advertisement

This site is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for sites to earn
advertising fees by advertising and linking to Amazon.com or its affiliates.

All times are GMT -5. The time now is 06:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.