Cast Iron Collector Forums

Cast Iron Collector Forums (http://www.castironcollector.com/forum/index.php)
-   General Cast Iron (http://www.castironcollector.com/forum/forumdisplay.php?f=6)
-   -   Griswold 402 Gas Hot Plate (http://www.castironcollector.com/forum/showthread.php?t=8087)

MDFraley 09-09-2020 08:53 PM

Griswold 402 Gas Hot Plate
 
Picked up a two burner hot Plate a few weeks back and have been restoring it. It has been completely disassembled cleaned and prior to re-assembly I wrestled about what kind of finish I wanted to use. I do not like the looks of the High Heat paints and since we have several old stoves and have used the stove black on them I thought I would do the Griswold using the same method. I personally think it does a great job and also gives it a level of protection from rust.
Just wanted to share what I have done and see if anyone else has ever used this method on pieces that do not come in contact directly with food? It takes a few days to cure to a degree that no black will come off when touched. The pic I have enclosed with this post has the stuff I used and if you have an old heater type stove I would recommend using it. I have a Brooding house heater I put it on over a year ago and it has set outside exposed to all phases of weather here in Arizona and it still looks as good as the day I put it on.
https://imgur.com/RfXG2lw

Jody M 09-10-2020 06:54 PM

Re: Griswold 402 Gas Hot Plate
 
Looks good. I like the matte finish. I restored an ERIEZ Radiator once, but used the high heat paint.


All times are GMT -5. The time now is 09:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.