Cast Iron Collector Forums

Cast Iron Collector Forums (http://www.castironcollector.com/forum/index.php)
-   General Cast Iron (http://www.castironcollector.com/forum/forumdisplay.php?f=6)
-   -   Identification Help: #3, Made in the USA, 6-1/9”? (http://www.castironcollector.com/forum/showthread.php?t=7953)

Cody_S 05-17-2020 10:04 AM

Identification Help: #3, Made in the USA, 6-1/9”?
 
Found this while cleaning out the camper. No brand markings. Surfaces isn’t polished smooth but is a lot smoother than a modern lodge.

https://imgur.com/a/L1PyxTP

GTurner 05-17-2020 10:24 AM

Re: Identification Help: #3, Made in the USA, 6-1/9”?
 
Cody_S, it looks like it might be an unmarked Wagner.

Doug D. 05-17-2020 10:24 AM

Re: Identification Help: #3, Made in the USA, 6-1/9”?
 
A (very) late unmarked Wagner. 6-1/2 inch, casting too grainy to clearly form the 2.

SeanD 05-17-2020 11:18 AM

Re: Identification Help: #3, Made in the USA, 6-1/9”?
 
Is it just me, or is there a screw on the underside of the handle? Never saw that before....and the casting does look very rough.

Cody_S 05-17-2020 11:22 AM

Re: Identification Help: #3, Made in the USA, 6-1/9”?
 
Quote:

Originally Posted by SeanD (Post 47534)
Is it just me, or is there a screw on the underside of the handle? Never saw that before....and the casting does look very rough.

I can assure you that’s a casting mark. Not a physical screw of any kind

Doug D. 05-17-2020 11:48 AM

Re: Identification Help: #3, Made in the USA, 6-1/9”?
 
The screw was in the pattern. A quality control device used with automated molding lines.

Related: http://www.castironcollector.com/damage.php#nondefects


All times are GMT -5. The time now is 10:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.