Cast Iron Collector Forums

Cast Iron Collector Forums (
-   General Cast Iron (
-   -   Un Marked Square Pan (

Jay Reiter 08-14-2020 03:50 PM

Re: Un Marked Square Pan
1 Attachment(s)
Doug Here is the picture. The pan is 14 inches total length. The pan measures 9 5/8 inches square at the top of the sides.. The inside depth is 1 5/8 inches. The wall thickness is just under 1/8 inch. As you can see from the bottom picture I can see no other markings beside the ones on the handle. I was hoping it would say Wagner, Griswold or Lodge when all the crud was gone.

Doug D. 08-14-2020 04:11 PM

Re: Un Marked Square Pan
The Lodge 8SQSK had a couple of handle versions, and one looks visually identical to this pan, marked with an 8 at 12 o'clock and the SQSK directly below, along with pattern ID letter at 6 o'clock. Later versions with Made In USA at center have a different handle. Lodge, however, was not known to make completely unmarked pans, and if marking conventions of other Lodge pans hold true, one would expect if this were Lodge for it to at least have the 8 at 12 o'clock. There are a few in eBay completed listings currently that are completely unmarked and look like this one, but none are purported to be Lodge.

Jay Reiter 08-14-2020 05:21 PM

Re: Un Marked Square Pan
On ebay I found at least 2 that were identical down to the "R" on the handle. The antique name items had different casting patterns .

All times are GMT -5. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.