View Single Post
  #1  
Old 03-20-2018, 07:47 PM
JeffreyL JeffreyL is offline
Senior Member
 
Join Date: Nov 2016
Posts: 445
Default #3 Pan ID Questions

After digging around and finding I had quite a stack of 3's, I decided since they're relatively cheap and easy to store I would try and see how many different 3's I can pick up. So here's two I picked up that I'm not quite sure about...

First one is hammered, no markings on bottom except 3 dots on backside of handle. Hammering looks CHF? Or just one of the "ugly hammered"?
https://imgur.com/a/eIqLQ

Second one appears to be a BSR, Backside handle ridge that meets pan wall, inset heat ring, however the markings of the 3_S, don't look consistent with the 3S pans I see from the BSR "S" series. And my understanding is the S series is smaller per size than regular pans, and this one seems normal size
https://imgur.com/a/n3w2M
Reply With Quote